BREAKING NEWS: Rohde & Schwarz supports ESA JUICE expedition      Anritsu and Autotalks Collaborate on V2X DSRC Test Solution offering Reduced Test Time and Cost      Marvell Announces Industry’s Most Complete 802.11ax Wireless Portfolio      SEGGER Embedded Studio and J-Link support Amazon FreeRTOS      Dedicated calibration instrument reduces cost and complexity of calibrating power meters and analysers     
AMS Technologies Introduces Development Kit for Adjustable Liquid Cooling up to 1.6 kW
Tuesday, November 28, 2017

AMS Technologies is introducing a very compact and low-vibration solution for liquid cooling that can be modulated within a wide range. The mLC-KIT 1600 with dimensions of a typical 19-inch rackmount case is the latest addition to the Mini Liquid Cooling Kit series with a model that provides up to 1.6 kW cooling capacity.

 

AMS008A_smThe mLC-KIT 1600 development kit is based on two linear compressors featuring high efficiency, continuous, oil-free operation with very low-vibration, quiet operation and the possibility to modulate the cooling power from almost zero up to the maximum value of about 1.6 kW1. This modulation is realized by varying the linear motor’s stroke at a fixed frequency, which avoids vibration and noise issues due to resonant oscillations often associated with rotary speed controlled compressors.

With its compact setup (440 mm x 184 mm x 365 mm), the development kit is ideally suited as a cooling device for custom-specific liquid coolant circuits and can be easily integrated into 19-inch racks.  The interface to the customer’s application comprises two R 3/8” connectors at the brazed plate heat exchanger and a digital frequency signal (5 V square wave signal with 20 Hz to 200 Hz) for cooling capacity control.

Operating from a 230 V AC supply, the power consumption of the mLC-KIT 1600 ranges between 20 W and 440 W – depending on the cooling power – with an operating noise of 38 dBA (without fans). Recommended flow rate on the liquid coolant side is 2 l to 8 l per minute.

If a customer’s requirements should not be covered by the “Mini Liquid Cooling Kit mLC-KIT 1600”, AMS Technologies’ thermal management experts are happy to come up with a fully customized solution offering full service from design all the way to serial production.

Contact: AMS Technologies, Stefan Amereller, Thermal Management, Tel: +49 89 89577-324, E-Mail: info@amstechnologies

1 +25 °C liquid coolant temperature and +25 °C ambient temperature

For further information about AMS Technologies, please visit our website www.amstechnologies. com

 

Skyscraper

Skyscraper 2

Skyscraper 3

Skyscraper 4

Skyscraper 5

Skyscraper 6